Page 2 of 2

Re: Cyril Bateman "Speaker Amp Interaction" Unpublished Part 2

Posted: Wed Nov 27, 2019 3:45 pm
by mediatechnology
Other Bateman Articles:

November 27, 2019. Now includes Part 1 and the previously-unpublished Part 2 (begins page 16) courtesy of forum member Ian Hegglun. Ian was helping Cyril proof read the article but it was never published before Cyril died. Ian believes Cyril would have made part 2 available to the public if he could have. Thank you Ian for sending this important unpublished article by Cyril.

Bateman, Speaker Amp Interaction:
http://www.waynekirkwood.com/images/pdf ... action.pdf [5M]

(The new link is also included in the original post.)

Re: Cyril Bateman Capacitor Sound Archive

Posted: Sun Dec 01, 2019 12:50 pm
by Gold
I plan on trying C0G ceramics in the Barry Porter Net EQ I’m starting in on. I haven’t heard of anyone using them in an EQ circuit. I hope they sound as clean as they look on paper.

Re: Cyril Bateman Capacitor Sound Archive

Posted: Sun Dec 01, 2019 1:31 pm
by JR.
Gold wrote: Sun Dec 01, 2019 12:50 pm I plan on trying C0G ceramics in the Barry Porter Net EQ I’m starting in on. I haven’t heard of anyone using them in an EQ circuit. I hope they sound as clean as they look on paper.
COG, aka NPO, are very linear so should be fine in any audio frequency path.

Back a couple decades ago we didn't have such good options for SMD caps in audio filters. I had some catastrophic results using film SMD caps that did not survive my contract manufacturer's process... the plastic used in the film caps became physically unstable resulting in shifting values and worse.

NPO/COG will be fine.

JR

Re: Cyril Bateman Capacitor Sound Archive

Posted: Fri Sep 24, 2021 12:25 pm
by mediatechnology
Added Bateman, Capacitor Misunderstandings: https://www.waynekirkwood.com/images/pd ... ndings.pdf